When installing a Hayward cartridge pool filter, be sure to give yourself plenty of room to work around, service and repair it later. (Priming time dependson suction lift and horizontal length of suction piping.)
The advanced design reduces operation and maintenance has beenWhen installing and using this electrical equipment, basic safety precautions should always be followed,WARNING - To reduce risk of injury, do not permit children to use this product unless they are closely supervised at all times.CAUTION - This pump is U.L. Your Hayward self-priming centrifugal pump has been quality-built andengineered to give you many years of efficient, dependable, corrosion-freeservice. Motor must always be properly grounded. A permanently installed pool is constructed in or on the ground and cannot be readilydisassembled for storage. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the You then will have to tighten the unions. Operation & Maintenance. If cordconnected, use only a properly grounded outlet. The turnover rate for the pool may not be as large as the spa jet requirement.
Filters View All Products. Programming.
Ifthe pump will not start, or will not prime, see TROUBLE Installation & Startup. poolside news GO BACK.
Manual will be automatically added to "My Manuals"
(The air that is to bedisplaced from the suction line must have some place togo.)
Electricalcircuits must be protected by proper size ground faultcircuit interrupter (GFCI) as required by applicableincluding the following: Failure to follow instructions may result in injury.electrical codes.
MANUALS & HOW TO GUIDES Please remove additional products. If you have an old pump you will want to screw the cone adapters out from the old pump, then you will want to re-Teflon tape them, then you will want to tighten then into the new pump. A storable pool is constructed so that it may be readily disassembled for storage and reassembled toIf installed within an outer enclosure or beneath the skirt of a hot tub or spa, adequate ventilation and free circulation of air mustUse motor bonding lug to connect the motor with other bonding parts using a #8 AWG conductor as required by electrical codes.NOTE: If your pump is equipped with a 3 ft. (1 m) cord and twist lock plug, items 5 through 8 apply.WARNING - Risk of Electric Shock. Pump.
Above Ground Super Pump Installation: Installing the Hayward Super Pump onto an above ground filter system will require you to either hook up the pump to existing hard piped PVC plumbing on your above ground pool or like most people, you will need to connect the pump to the hoses that attach to your pool.
Water Pump Hayward Turbo Flo II Installation And Operating Instructions. Contact a qualified electrician if you cannot verify that the receptacle is protected by a GFCI.Do not bury cord.
Our app is now available on Google Play Contact a qualified electrician if you cannot verify that the receptacle is protected by a GFCI.Do not bury cord. listed for permanently installed pools and may also be used with hot tubs and spas if so marked.It is not U.L.
Hayward self-priming max-flo pump The suction side hooks up the skimmer on your above ground pool, then the discharge side of the pump(top) will hook up to your filter. Locate cord to minimize abuse from lawn mowers, hedge trimmers, and other equipment.WARNING - To reduce the risk of electric shock, replace damaged cord immediately.WARNING - To reduce the risk of electric shock, do not use extension cord to connect unit to electric supply; provide aLocate the pump as close to pool as practical and runsuction line as direct as possible. Connect only to a grounding-type receptacle protected by a ground fault circuit interrupter(GFCI).
There should be a “pump in” label on the multiport or the filter valve. Click OK to extend your time for an additional 0 minutes. Installation & Startup. listed for storable pools.
This is if your above ground swimming pool uses hard piped PVC instead of the flexible hoses to connect to the pool and the filter system.I installed the super pool pump, but it keeps stopping and the breaker triggers. HTML Link: support Contact Hayward Support . ... Hayward Pool Products View FAQs.
Manual will be automatically added to "My Manuals" Established in 1987, Hayward Pools & Services (Singapore) specialises in the construction & installation of vinyl liner pools.
Thank you.Your wires are probably too small.